Mains pressure hot water thermal store for use with central plant boilers
The BoilerMate SP is for use with a sealed primary system and is the perfect partner for central plant heating systems. Its main benefits for the installer or developer include;
Reduction in pipe size
Reduction in the central plant size
Built in diversity
- No G3 qualification requirement for installation
The BoilerMate SP thermal stores also provides the homeowner with:
Mains pressure hot water giving ‘power shower’ performance
A cylinder reheat time of approximately 20-25 minutes
- Allows for dry roof space eliminating the risk of freezing pipes/tanks in winter
- No annual maintenance or safety check requirement
Increased system efficiency, reducing running costs
Easy to install, the BoilerMate SP can be fitted to existing systems, with no requirement for pipework oversizing.
As it is vented and therefore inherently safe, there is no requirement for a safety discharge, and therefore is not subject to G3 Building Control Regulations – thus simplifying installation and system maintenance enormously for the landlords or homeowners.
BoilerMate SP models are designed to be fed directly from the mains. With the water being instantaneously heated via the plate heat exchanger, this removes any risk of legionella.