PulsaCoil A-Class is the latest evolution of Gledhill ’s low tariff electrically heated mains pressure hot water system which delivers the same exceptional hot water performance as ever but is now even more efficient,more responsive, simpler to install and operate.
Requires no pressure relief, no
tundish – no runaway of any kind.
PulsaCoil ’s ability to provide mains pressure hot water at high flow rates without the need for pressure or temperature relief valves, tundishes and associated run- away pipework has made it the no.1 choice in new build apartments and inner-city conversions.
Immersion heaters that can never scale
Because the immersion elements are situated in the same primary water all the time and this water is not renewed, no scaling takes place, even in hard water areas.
No annual service required
The appliance ’s advanced construction ensures a long life and the primary store design removes the need for annual checks on sacrificial anodes, found on many unvented units.
Smaller Size
With the width reduced to just 530mm and a height
reduction of up to 260mm on the largest models,
PulsaCoil A-Class will fit in a smaller space and there is
now even more usable space in the airing cupboard. All
this is achieved despite an improved performance from
each unit.
Easy to Install
All models are supplied shrink wrapped with built in
moulded lifting handles.All controls and pipe-work are
mounted on the front face of the unit for ease of
installation and maintenance.
Gledhill ’s revolutionary
design enables rapid second fixing using copper or
approved plastic piping and a variety of optional fixings,
such as flexible pipes and push fit connections.
Reduced Weight
To make handling even easier the weight of all models has been reduced (by 26kg on the largest model)
Siting Flexibility
With no runaway/pressure relief pipework to consider PulsaCoil A-Class can be sited anywhere in apartments.
Better for the Homeowner
Improved Hot Water Performance
Even at low flow rates
Electronic Thermostatic Control
The most up-to-date technology to provide highly accurate, reliable temperature control.
Improved Safety Overheat Protection
The very latest electronic control will automatically re-set the unit, eliminating the possibility of ‘no hot water ’.
Improved Insulation
With even higher insulation levels, PulsaCoil A-Class ensures low running costs.
Technical Specification for PulsaCoil A-Class
Model options for PulsaCoil A-Class
Automatic Electrical Checks
Simplified installation regimes reduce the possibility of incorrect wiring and ensure low running costs.
Water Treatment
The Domestic Heating Compliance Guide published in May 2006 requires a water treatment device to be fitted where the hardness is greater than 200ppm. This is a requirement for both combis and storage vessels to comply with Building Regulations L1A and L1B. The Gledhill in-line scale inhibitor CAN BE SPECIFIED AT TIME OF ORDER for a very modest cost. This is fitted within the case and therefore does not require the provision of a fused spur in the cupboard.
Significant Reduction in Site Wiring
Fused power supply circuits have been reduced from 3 to 2 and this means a significant saving in site wiring.
Simplified Electrical Connections
Incorporating Pushfit electrical wiring terminals means faster installation and more reliable connections.
Integral Boost Facility
PulsaCoil A-Class comes complete with a boost button on the front of the appliance. This eliminates the need for a separate boost timer and associated wiring – saving time and money on site.
Please Click Here for SAP information
